MACHINE LIST

                                                              ALL  OUR  MACHINES  ARE  KEPT  IN  TOP  CONDITION

                                                            AND  ARE  VERY  ACCURATE  WITH  DIGITAL  READOUTS

                                 PLANERS

                                                            Rockford Openside - 24" X 24" X 6'  with full form Kopy Kat Tracer  

                                                            Gray Openside Milling Planer - 42" X 42" X 12' cap. 10-300 fpm w/DRO's

                                                            Niles - 42" X 42" X 16'   7-200 fpm + Tracing,Milling  1982 [rebuild]

                                                            Cincinnatti  D.H. - 36" X 36" X 20' cap. 7-200 fpm with 3 Heads

                                                            Gray Openside Milling Planer - 6' X 5' X 14' cap. 4-240 fpm w/DRO's

                                                            Cincinnatti Openside Milling Planer - 5' X 5' X 20' cap. 8-240 fpm  w/DRO's

                                                            Gray Openside Milling Planer - 10' X 8' X 40' cap. 10-310 fpm  3 Mill Heads w/DRO's

 HORIZONTAL BORING MILLS     

                                                            80MM Bar PBR - Rotary Table + Vertical Head  1966

                                                            130MM Bar Sinada - floor type,16' 6" hor. X  10' travel  1973

                                                             6" Bar Gray Planer type - 20' hor. X  8' ver. X 4' Col. travel w/vertical h 1957

               MILLING MACHINES

                                                            Trak TRM Vert. 3hp Bed type  w/ 2 Axis CNC controls  1995

                                                            # 2 Model K Horizontal  K&T  15-1500 rpm  w/ H.D. Vert. Head

                                                            # 3 OKK Vertical Bed type  45-1500 rpm  w/DRO's

                                                            420 TF-17 K&T Horizontal  w/ Vertical Head  [rebuilt 1999]

                                                            # 5 Bed-type TUDA Vertical 40hp  60-1710 rpm  w/DRO's

                                                            Boko WF3/12 Vertical - Rotary Table  5 axis  w/DRO's  1980

             TURNING MACHINES

                                                            12" Graziano Engine Lathe, 30" centers,  75 - 2000 rpm

                                                            17" Okuma Engine Lathe, 60" centers,  35-1800 rpm  w/tracer  [rebuilt 1987]

                                                            25" Lion Engine Lathe, 120" centers  fully equiped  new 1998

                                                            32" Martin Engine Lathe, 16'-6" centers,  7-1120 rpm  [rebuilt 2000]

                                                            36" Bullard Vertical Turret Lathe,  6-174 rpm  w/DRO's

                                                            62" King Vertical Turret Lathe,3 Heads,70" max. swing,  2-84 rpm  w/DRO's

                                                            12'  Cincinnatti  Hypro Vertical Boring Mill,3 Heads  w/ Tracer & DRO's

                     CNC  MACHINES

                                                            Mazak  QT 35  Lathe - 20" max swing,16" over carriage, 60"  centers,   3,000 rpm

                                                            Mazak  V 15N  Vertical Mill - X = 40.16", Y = 25.00", Z = 21.65",   3,150  rpm

                                                            Mazak  H 800  Horizontal Mill - X = 49.21", Y = 39.37", Z = 33.46",   4,500  rpm

                      CMM  MACHINE         

                                                            Mitutoyo  B - 710 -  X = 28.00",  Y = 40.00",  Z = 24.00 - Accuracy = 0.0002"

                               GRINDERS

                                                            8" X 24"  Jakobsen  -  Surface  Grinder - 3 hp., 12"  Wheel   [1997 rebuild]

                                                            20" X 24" X 48"  Mattison  -  Die  Block  Grinder - 20" wheel  20hp.  [1999 rebuild]

                                                            24" X 36" X 16'  Thompson  -  Surface  Grinder - 30hp  [1998 rebuild]

                      DRILL PRESSES

                                                            20" Clausing  3 Head Multiple Drill Variable Speeds 23

                                                            Lindmark  Vert. Spindle Drilling Machine - 16" X  16" X 12'  w/DRO's

                                                            3'  Arm  9" column  American Radial Drill - 12 speed  50-1500 rpm

                                                            5'  Arm  16" column  Ooya Radial Drill - 20-2180 rpm

                                                            6'  Arm  17" column  American Radial Drill - 15-1200 rpm

                                      SAWS

                                                            36"  Doall Contour Bandsaw - 3 hp  D.C. Drive   1981

                                                            # 9A  Marvell Power Hacksaw - 10" X 10"  w/auto bar feed

                               SLOTTERS

                                                            12"  stroke Rockford - 28"  dia. table  [rebuilt 1973]

                                                            36"  stroke Rockford - 42"  dia. table  [rebuilt 1970]

                                 PRESSES

                                                            100 Ton  C frame  Hannafin Vertical Straightening Press  w/21" X 96" table  

                                                             [rebuilt 1995]

                                                            250 Ton  Hydraulic Straightening Press, 24" stroke - 62" X 81" opening   

                                                             [rebuilt 1982]